大型复杂产品可靠性评估的单调约束模型
DOI:
作者:
作者单位:

1. 北京航空航天大学经济管理学院;北京航空航天大学可靠性工程研究所
2. 北京航空航天大学经济管理学院
3. 北京航空航天大学工程系统工程系

作者简介:

刘智洋

通讯作者:

中图分类号:

TP202+.1

基金项目:


Monotone restriction model of large-scale complex product reliability evaluation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    大型复杂产品的试验样本通常呈现多阶段小子样特性. 因此, 为减少单阶段样本量较少所导致的评估误
    差, 提出以添加前提约束的方法来利用产品全阶段试验数据. 首先推导出可靠性参数在单调约束条件下的通用分布函数; 然后给出常用指标任务可靠度和MTBF的一种近似计算方法; 最后给出一例实际数据的计算结果. 由于约束简单且可以求得可靠性参数的分布函数, 该方法的工程适应性强于传统AMSAA模型, 并能获得Duane 模型无法给出的区间估计.

    Abstract:

    The test data of large-scale complex product usually presents small sample and multi-phase characteristic.Therefore, to reduce the evaluation error caused by small sample of one phase, a constraint condition is introduced to products reliability evaluation, thus the multi-phase test data can be used. Under such constraint condition, the reliability parameter is considered as a random variable and the reliability parameter distribution function is given firstly. Then an approximate calculation method for mission reliability and mean time between failure (MTBF) is presented. Finally, the result based on actual data is shown. Since the constraint condition is brief and the reliability parameter distribution function can be achieved, this method is more applicable for engineering than traditional AMSAA-Model (army materiel systems analysis activity model), and the reliability interval estimation can be gained which can not be obtained from Duane-model.

    参考文献
    相似文献
    引证文献
引用本文

刘智洋 刘鲁 黄敏.大型复杂产品可靠性评估的单调约束模型[J].控制与决策,2010,25(5):777-779

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-05-25
  • 最后修改日期:2009-09-17
  • 录用日期:
  • 在线发布日期: 2010-05-20
  • 出版日期: