引用本文:许宇翔,葛红娟.四端输出三相-两相矩阵变换器间接控制策略[J].控制与决策,2019,34(10):2048-2060
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】 附件
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 85次   下载 112 本文二维码信息
码上扫一扫!
分享到: 微信 更多
四端输出三相-两相矩阵变换器间接控制策略
许宇翔1,2, 葛红娟1
(1. 南京航空航天大学自动化学院,南京211106;2. 湖州师范学院工学院,浙江湖州313000)
摘要:
针对三相-两相矩阵变换器(3-2MC)拓扑无大容量储能元件,输出不对称影响输入电流质量的问题,提出一类引入脉动功率补偿单元的三端和四端输出3-2MC拓扑.首先,详细阐述上述所提两种变换器抑制输出脉动功率进而提高输入性能的原理、实现过程和适用范围,推导四端输出3-2MC的电压传输率与系统参数之间的关系式,并基于上述拓扑特点,提出输出扇区划分方式;然后,提出以输出侧与补偿侧三相电流加权量作为间接控制量的级联式控制策略,从理论上对其可行性进行分析,并给出系统控制参数的优化选取方法.仿真结果表明,基于间接控制策略的四端输出3-2MC拓扑可有效改善输出不对称情况下的输入电流性能,与传统的三端无补偿单元拓扑相比,该方法具有良好的动态性能和更大的输出适用范围.
关键词:  四端输出  三相-两相矩阵变换器  间接控制  输出不对称  脉动功率  电流加权量
DOI:10.13195/j.kzyjc.2018.0209
分类号:TM464
基金项目:国家自然科学基金项目(U1233127);浙江省自然科学基金项目(LY19F030002);湖州市自然科学基金项目(2017YZ09).
Indirect control strategy of three-phase to two-phase matrix converter under four terminal output
XU Yu-xiang1,2,GE Hong-juan1
(1. College of Automation Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 211106,China; $ $;2. School of Engineering, Huzhou University,Huzhou 313000,China)
Abstract:
For the three-phase to two-phase matrix converter (3-2MC) without large-capacity energy storage components, the output asymmetry affects the input current quality. To deal with this problem, we present a class of three-terminal and four-terminal output 3-2MC topologies with pulsating power compensation unit. Firstly, the principle, the realization process and the application range of the two kinds of converters to suppress the output pulsating power and improve the input performance are described in detail. The relationship between the voltage transmission rate and the system parameters of the four terminal output 3-2MC is deduced. Based on the characteristics of the topology, the output sector division method is proposed. Then, a cascade control strategy is proposed, taking the output side and the compensation side three-phase current weighting amount as the indirect control quantity, and the feasibility is analyzed theoretically. Furthermore, an optimization method of system control parameters is given. The simulation results show that the four-terminal output 3-2MC topology based on the indirect control strategy can effectively improve the input current performance under asymmetric output. Compared with the traditional three-terminal topology without pulsating power compensation unit, the proposed method has good dynamic performance and more large output range.
Key words:  four terminal output  three-phase to two-phase matrix converter  indirect control  asymmetrical output  pulsating power  current weighting amount

用微信扫一扫

用微信扫一扫