柔性宽度浇次计划编制的一种混合改进算法
CSTR:
作者:
作者单位:

山东大学控制科学与工程学院,济南250061.

作者简介:

李歧强

通讯作者:

中图分类号:

TP31

基金项目:

国家863 计划项目(2007AA04Z157);山东省自然科学基金重点项目(ZR2010FZ001);山东大学研究生自主创新基金项目(2082012yzc12136).


Hybrid improved algorithm for cast planning problem with flexible width
Author:
Affiliation:

School of Control Science and Engineering,Shandong University,Ji’nan 250061,China.

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    根据连铸工艺特点, 炉次的宽度是柔性值, 充分利用炉次宽度的柔性可以有效提高中间包的利用率, 但同时会增加浇次计划的编制难度. 根据柔性宽度浇次计划问题特征, 建立其广义车辆路径问题模型, 并构建一种混合改进算法进行求解. 该算法基于局部-全局方法, 将柔性宽度浇次计划问题分解为确定炉次顺序和选取炉次宽度两个子问题, 并利用改进的交叉熵法和可达算法分别进行求解. 最后通过实例表明了所提出模型和算法的有效性.

    Abstract:

    The widths of charges are flexible values in the cast planning problem, which can be used to increase the utilization of tundishes. But meanwhile, the cast planning becomes more difficult. According to the characteristics of the cast planning problem, the model based on generalized vehicle routing problem and the hybrid improved algorithm are proposed. Based on the local-global approach, the flexible width cast planning problem is decomposed to two sub-problems, charge order and charge widths, which are solved by using the improved cross-entropy method and reaching algorithm respectively. Finally, actual numerical examples are given to demonstrate the effectiveness of the proposed model and algorithm.

    参考文献
    相似文献
    引证文献
引用本文

杨凡 李歧强 王桂荣.柔性宽度浇次计划编制的一种混合改进算法[J].控制与决策,2015,30(2):348-352

复制
相关视频

分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2013-12-10
  • 最后修改日期:2014-04-08
  • 录用日期:
  • 在线发布日期: 2015-02-20
  • 出版日期:
文章二维码